Stainless Steel Flanges

Product Details:

This type of flanges are usually used for smaller pipe wherein the diameters in low-temperature and low-pressure areas feature a connection in which the pipe is placed inside the flange in order to secure the connection with a single or multi-pass fillet weld. This is responsible for making the style simple in installing as compared to other welded flange types by avoiding the limitations that are associated with the threaded ends.

Product Details:

We are manufacturer and exporter of prime quality and superior performance stainless steel flanges for varied needs of our purchasers. Designed as per market standards and parameters. Our flanges square measure high in sturdiness and may face up to extreme conditions. Our comprehensive vary includes weld neck flanges, socket weld flanges and plenty of additional.

Stainless Steel Flanges :

ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310S, 310H, 316, 316L, 316H, 321, 321H, 317, 317L, 904L, SMO254 ETC....

Range

15 NB UP TO 1200 NB

IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / TABLE 2.5, TABLE 6, TABLE 10, TABLE 16,TABLE 25, TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400

 

Form :

• Slip on stainless steel flange
• Socket weld stainless steel flange
• Blind stainless steel flange
• Lapped stainless steel flange
• Screwed stainless steel flange
• Weld neck stainless steel flange
• Reducing stainless steel flange
• Spectacle stainless steel flange
• Slip on boss stainless steel flange
• Plate stainless steel flange
• Plate blank stainless steel flange
• Screwed boss stainless steel flange

Manufacturing Capability

Additional Information:

• Production Capacity: 10000

These type of flanges are highly used for terminating the piping system. The blind flanges are found to be shaped like a boltable blank disc. Once these are installed properly and combined with the correct gaskets, it can achieve an outstanding seal which is easy to remove whenever required.

Slip-on flanges are found to be very common and also available in a wide range of sizes in order to accommodate the systems with high rate of flow and throughput. It is quite easy to install it by simply matching the flange with the outer diameter of the pipe in order to connect it. Installing these flanges is bit technical as there is a need of fillet weld on the both side in order to secure the flange to the pipe.

We are manufacturer and exporter of prime quality and superior performance stainless steel flanges for varied needs of our purchasers. Designed as per market standards and parameters. Our flanges square measure high in sturdiness and may face up to extreme conditions. Our comprehensive vary includes weld neck flanges, socket weld flanges and plenty of additional.

Stainless Steel Flanges :

ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310S, 310H, 316, 316L, 316H, 321, 321H, 317, 317L, 904L, SMO254 ETC....

Range

15 NB UP TO 1200 NB

IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / TABLE 2.5, TABLE 6, TABLE 10, TABLE 16,TABLE 25, TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400

 

Form :

• Slip on stainless steel flange
• Socket weld stainless steel flange
• Blind stainless steel flange
• Lapped stainless steel flange
• Screwed stainless steel flange
• Weld neck stainless steel flange
• Reducing stainless steel flange
• Spectacle stainless steel flange
• Slip on boss stainless steel flange
• Plate stainless steel flange
• Plate blank stainless steel flange
• Screwed boss stainless steel flange

Manufacturing Capability

Weld neck flange (WN flange) has a neck that can relocated stress of the pipe, so to reduce the pressure that gathered in the flange bottom. It is compatible to the pipelines that works in high or low temperature and bear high pressure. Specially for the pipe or the valves when PN is larger than 2.5 Mpa. Material Standards ASTM A105/N For carbon steel weld neck flange ASTM A182 F11, F22 for alloy steel ASTM A182 F304 / F304L, F316 / F316L for stainless steel weld neck flange. Weld neck flange mainly used in medium, high pressure pipes connecting, most butt weld flange with neck also called nipple flange. Therefore, the installation cost of the welding flange, labor costs and auxiliary materials costs are higher, because there is more than one process.

Product Details:

Threaded flange is connecting with pipe without welding. It is similar to slip on flange or a socket weld flange, fitted with a tapered thread (screw) inside the flange bore that is mounted on the pipe with corresponding external threads. In some cases a seal weld also applied in conjunction with threaded pipe flange. Standard: ASTM A105, ASTM A182 Material: Carbon Steel, Stainless Steel, Alloy Steel Size Range: 1/2'', 1'', 2'', 3'', 4'' to 24'' Pressure Class: Class 150 to 2500 Face: Raised face (RF), Ring type joint (RTJ) Though threaded pipe flange is available in different dimensions, threaded fittings mostly is used in small diameters pipeline. (Below 4 inch normally.) On the other hand, it is not compatible with a pipe system in thin wall thickness, since there is no space for doing the threading.

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock
• Packaging Details: With Wooden Box

We are manufacturer and exporter of prime quality and superior performance stainless steel flanges for varied needs of our purchasers. Designed as per market standards and parameters. Our flanges square measure high in sturdiness and may face up to extreme conditions. Our comprehensive vary includes weld neck flanges, socket weld flanges and plenty of additional.

Stainless Steel Flanges :

ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310S, 310H, 316, 316L, 316H, 321, 321H, 317, 317L, 904L, SMO254 ETC....

Range

15 NB UP TO 1200 NB

IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / TABLE 2.5, TABLE 6, TABLE 10, TABLE 16,TABLE 25, TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400

 

Form :

• Slip on stainless steel flange
• Socket weld stainless steel flange
• Blind stainless steel flange
• Lapped stainless steel flange
• Screwed stainless steel flange
• Weld neck stainless steel flange
• Reducing stainless steel flange
• Spectacle stainless steel flange
• Slip on boss stainless steel flange
• Plate stainless steel flange
• Plate blank stainless steel flange
• Screwed boss stainless steel flange

Manufacturing Capability

We are manufacturer and exporter of prime quality and superior performance stainless steel flanges for varied needs of our purchasers. Designed as per market standards and parameters. Our flanges square measure high in sturdiness and may face up to extreme conditions. Our comprehensive vary includes weld neck flanges, socket weld flanges and plenty of additional.

Stainless Steel Flanges :

ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310S, 310H, 316, 316L, 316H, 321, 321H, 317, 317L, 904L, SMO254 ETC....

Range

15 NB UP TO 1200 NB

IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / TABLE 2.5, TABLE 6, TABLE 10, TABLE 16,TABLE 25, TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400

 

Form :

• Slip on stainless steel flange
• Socket weld stainless steel flange
• Blind stainless steel flange
• Lapped stainless steel flange
• Screwed stainless steel flange
• Weld neck stainless steel flange
• Reducing stainless steel flange
• Spectacle stainless steel flange
• Slip on boss stainless steel flange
• Plate stainless steel flange
• Plate blank stainless steel flange
• Screwed boss stainless steel flange

Manufacturing Capability